Search
Filters

APPLICATION

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

USAGE DIRECTIONS

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

COVERAGE

Approximately 6-12 sq. ft. per can.

FOR BEST RESULTS

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

REMOVAL

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

AVAILABLE COLORS: BLACK

Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
Protect all painted surfaces, chrome trim, plastic and wheels. Defend against paint chips and scratches caused by road debris. Stylise your vehicle to give it a distinctive look. Easy to apply, easy to remove. Scientifically formulated to resist the weather and elements for up to 3 months. Protect against bugs, dirt and road debris. Create racing stripes. Give wheels a new look while protecting against brake dust.
Old price: Rs2,000.00
Rs800.00
Manufacturer: ARMOR ALL

APPLICATION

Surface must be clean and dry. To protect surrounding areas from overspray, tape off with painter’s tape and newspaper. Shake can vigorously for up to one minute after mixing ball begins to rattle. Continue to shake can periodically throughout application. Use only in well-ventilated area away from heat sources and sparks.

USAGE DIRECTIONS

  1. Hold can 6-12 inches from surface while spraying, moving back and forth, slightly overlapping each stroke.
  2. Apply 3-4 coats, allowing product to dry completely between applications.
  3. Before removing tape, re-spray along painted edges. Edges should be wet for tape removal
  4. Let dry before driving vehicle

COVERAGE

Approximately 6-12 sq. ft. per can.

FOR BEST RESULTS

Avoid applying in breezy conditions. To avoid clogged nozzle, turn can upside-down and spray for 5 seconds after use. Do not stick pin or other objects into stem.

REMOVAL

Use fingers to peel up edge of dried product. Continue to pull product up until completely removed. Dispose of peeled product in trash. For overspray, use Armor All® Bug and Tar Remover.

AVAILABLE COLORS: BLACK